How to Scan with the Handheld
Use the trigger to read RFID tags and barcodes, and know when the reader is reading.
Every scanning page in the Ramp app works the same way. You click the trigger to read RFID tags, double-click it to read a barcode, and the screen tells you when the reader is reading.
If the reader won't start, see Reader and Connection Problems.
Read RFID Tags
- Click the trigger once to start reading RFID tags. You don't need to hold it.
- Click the trigger once more to stop.
Scan a Barcode
On a page that takes both RFID tags and barcodes, two quick clicks fire the barcode scanner once instead of starting RFID.
- Aim the scanner at the barcode.
- Double-click the trigger. The two clicks must be within about a third of a second.
Check the Reader Is Reading
- While the reader is reading RFID, a RFID Reading chip shows at the top of the screen, on every page. When the chip goes away, the reader has stopped.
- The bottom of a scanning page shows Pull the trigger to scan while the reader is idle, and Pull the trigger to stop while it is reading.
Wait for Tags to Process
After a burst of reads, the page may briefly show Processing N tags… while it looks the tags up. Wait for it to finish before you save.
Clear Unsaved Scans
Tap Reset to clear the scans made since your last save. Saved scans stay.