Skip to content
English - Australia
  • There are no suggestions because the search field is empty.

Geiger Search Messages

What the Geiger Search messages mean and what to do about each one.

These messages can show while you search for a product or locate it with Geiger Search. Find the message below to see what it means and what to do.

For how to use Geiger Search, see How to Find an Item with Geiger Search.

Geiger Search Messages

Message What it means What to do
This SKU has no EPC encoding and cannot be located. The product's tags can't be told apart from others. Geiger Search can't find it; search by hand.
No tag to locate. / Nothing to locate. There are no known tags for the product. Check that you picked the right product.
Reader not ready. No reader is connected, or it's busy. See Reader and Connection Problems.
Couldn't search SKUs. Check your connection and try again. The search didn't reach the server. Check your connection and try again.
Only one SKU can be located at a time. Your device is set to find one product at a time. Pick a single product.
Couldn't start Geiger. The locator didn't open. Go back and try again. If it keeps failing, see Reader and Connection Problems.

If Geiger Search Doesn't Find or Read Anything

  1. Check that the device is online. Searching for a product needs a connection.
  2. Check that the reader is on and charged. Wait a few seconds after turning it on; it reconnects by itself.
  3. If it still doesn't read, restart the device and try again.
  4. If that doesn't help, see Reader and Connection Problems.